Home » Guides

How to Turn on Blind Spot Monitoring Dodge Charger

Most new cars come with some form of blind spot monitoring, but if your car doesn’t have it, there’s an aftermarket solution. Here’s how to turn on blind spot monitoring in a Dodge Charger. If your car didn’t come with blind spot monitoring, there’s an aftermarket solution that you can buy and install.

The first thing you need to do is find the right model for your car. There are many different brands and models of blind spot monitors, so make sure you get one that is compatible with your car. Once you have the right model, the next step is to install it.

This can be done yourself if you’re handy with tools, or you can take it to a professional installer. Either way, make sure the monitor is installed correctly so it works properly.

  • Start the engine of your Dodge Charger
  • Press the “Menu” button on your Dodge Charger’s infotainment system
  • Select the “Vehicle Settings” option from the menu
  • Scroll through the vehicle settings options until you find the “Blind Spot Monitoring” setting
  • Toggle the Blind Spot Monitoring setting to the “On” position
How to Turn on Blind Spot Monitoring Dodge Charger

Credit: www.diehlauto.com

How Do I Turn on My Blind Spot Sensor?

If you have a car with a blind spot sensor, you may be wondering how to turn it on. The process is actually quite simple. Here’s what you need to do:

1. Start the engine and put the car in drive. 2. Look for a button on your dash that says “BS” or “BLS.” This stands for Blind Spot Monitor.

3. Press and hold this button for three seconds. You should see a light on your mirror come on, indicating that the system is now active. 4. That’s it!

Now whenever you signal to change lanes, the blind spot sensor will be activated and will let you know if there’s someone in your blind spot.

How Do You Reset the Blind Spot Sensor on a Dodge Charger?

If you have a Dodge Charger with blind spot monitoring, there may come a time when you need to reset the system. Here’s how to do it: First, open up the hood and disconnect the battery.

This will reset all of the electronic systems in your car, including the blind spot sensor. Next, reconnect the battery and start your car. The blind spot sensor system should now be reset and ready to use.

Do Dodge Chargers Have Blind Spot Monitoring?

Yes, the Dodge Charger does have blind spot monitoring. This feature is part of the Advanced Safety Group package, which is available on select models. Blind spot monitoring uses sensors to detect when another vehicle is in your blind spot and will provide a visual alert on the side mirror.

If you turn on your signal while there is a vehicle in your blind spot, the system will provide an audible alert as well.

How Do I Turn My Bsm On?

Assuming you would like a blog post discussing the BMW BSM (Blind Spot Monitoring) feature: BSM is a driver assistance feature that uses sensors to monitor your vehicle’s blind spots. When a car is in your blind spot, an icon will illuminate on the corresponding side mirror.

If you activate your turn signal while a car is in your blind spot, the icon will flash and an audible warning will sound to alert you of the hazard. To turn BSM on, press and hold the button with the car and triangle symbol until it illuminates. The BSM system can be turned off by pressing and holding the button again until the light goes out.

BSM can be activated at speeds above 10 mph (15 km/h). The system automatically turns itself off when your vehicle’s speed drops below 6 mph (10 km/h). The BMW BSM system is a great safety feature that can help prevent accidents.

Be sure to familiarize yourself with how it works so that you can take full advantage of its capabilities!

How To Enable & Disable Blind Side Dectection On Equipped Chargers & Challengers!

Blind Spot Detection Not Working

If you have a car with blind spot detection, you know it’s a great feature to have. But what happens when it stops working? Here’s what you need to know about blind spot detection, and what to do if it stops working in your car.

Blind spot detection is a feature that uses sensors to detect when there is a vehicle in your blind spot. When the sensor detects a vehicle, it will warn you with a light on the side mirror or an audible warning. This is a great feature to have, because it can help prevent accidents.

However, like any other electronic system in your car, blind spot detection can stop working. If this happens, there are a few things you can do: First, check the fuse for the system.

If the fuse is blown, replace it and see if that fixes the problem. Next, check the sensors themselves for any dirt or debris that might be blocking them. You can clean them with a soft cloth or compressed air.

Finally, if neither of those solutions work, you may need to take your car to the dealership or an experienced mechanic for further diagnosis.

Conclusion

Blind Spot Monitoring (BSM) is a feature that is designed to help drivers be aware of their surroundings, and it can be especially helpful when changing lanes. The BSM system uses sensors to monitor the area around your vehicle, and if another car is in your blind spot, an indicator light will illuminate on the corresponding mirror. If you turn on your signal to change lanes while a car is in your blind spot, the BSM system will activate and provide a warning chime.

To turn on BSM in a Dodge Charger, first put the vehicle into Park. Then press and hold the button with the car silhouette and arrow until you see the Blind Spot Monitoring icon appear on the display screen. Once BSM is turned on, an indicator light will appear in each side mirror when there is another car in your blind spot.