When you drive a car, the engine automatically controls the throttle to maintain a comfortable driving speed. However, if something goes wrong with the engine or transmission, the throttle may not function properly. In such cases, you may need to reset the electronic throttle control manually. This is usually a fairly easy task that can be done in just a few minutes. In this article, we will show you how to reset the electronic throttle control manually and help you get back on the road as quickly as possible.
What is Electronic Throttle Control?
Electronic throttle control (ETC) is a means of controlling the engine speed using an electronic system. The ETC system works by monitoring the throttle position and sending adjustments to the engine controller to maintain a set RPM. Many modern vehicles use ETC to improve fuel economy and emissions. When you experience a problem with your ETC, there are several things you can do to try and fix it.
How to Reset Electronic Throttle Control Manually
If your throttle control is not responding as it should, there are a few things that you can do to try and reset it. In most cases, this will involve clearing the NVRAM (non-volatile RAM) on the controller.
To clear the NVRAM on the controller:
1. Turn off the engine
2. Disconnect all cables from the controller
3. Remove the cover of the controller
4. Look for a small button near the front of the controller marked “NVRAM CLEAR” or something similar. Push this button while holding down the RESET switch on the Controller. Hold down RESET until “NVRAM CLEAR” appears in green letters on-screen and release RESET. The NVRAM should now be cleared so that your throttle control will respond correctly when you reattach all cables and turn on your engine.
What to Do If the Engine Stalls while Driving
If your car stalls while driving, there are a few things you can do in order to get it started again. First, check your engine light. If the light is on, then there is probably something wrong with the engine. If the light is not on, then you can try one of the following methods to restart the engine:
1. Turn off your headlights and use your parking lights to see in front of you. This will help you find your way back to the highway if you get lost.
2. Kickstart the engine by hitting the gas pedal hard enough to make it start moving but not so hard that it causes damage. Be careful not to hit any other objects while doing this!
3. Use a battery jump start kit if you have one available. Follow the instructions that come with the kit to connect batteries and start the car.
4. If none of these methods work, call a tow truck or take your car to a mechanic for repairs.
Conclusion
Sometimes, electronic throttle control malfunctions and needs to be reset manually. This article will teach you how to do just that. By following the instructions in this article, you should be able to get your motorcycle back on the road in no time. Before starting any work, however, make sure that your bike is properly tuned and checked for proper fluid levels.