Home » Guides » How To Remove The Fan Clutch

How To Remove The Fan Clutch

Fan clutches are one of the most common problems on cars. If you’re not using your fan, your car will overheat. And, since fan clutches work by connecting the alternator to your engine, if you damage it, you won’t be able to fix it without a replacement part. So what can you do to remove a fan clutch? In this article, we’ll walk you through the steps involved and suggest some tools and supplies that you may need. By following these steps, you’ll be able to safely remove your fan clutch and get back on the road in no time!

What is the Fan Clutch?

When it comes to fan clutches, you have a few different types to choose from. Each type has its own advantages and disadvantages, so it’s important that you understand them before purchasing one. Here are the three types of fan clutches and what they do:

The manual clutch – This is the oldest type of clutch and is still in use today. It works by using a hand crank to engage and disengage the fan blades. The disadvantage is that it can be difficult to operate, especially if you’re wearing gloves.

The hydraulic clutch – This type of clutch uses hydraulic pressure to engage and disengage the fan blades. This makes it easier to use, but it can also be more expensive than the other two options.

The electronic clutch – This type of clutch uses electronic sensors to detect when the car is moving and automatically engages or disengages the fan blades. This is the most common type of clutch today, because it’s both easy to use and affordable.

How to Remove the Fan Clutch

If the fan clutch is sticking, it may be due to a build-up of grease, oil, or other debris. To remove the fan clutch: Remove the cover plate. Loosen the two screws that hold the cover plate in place and pull it off. (Be careful not to lose any screws!) Clean all debris from around the fan clutch and replace the cover plate. Tighten the two screws that hold it in place.

Tips for removing the fan clutch

If you’re having trouble removing the fan clutch, here are a few tips to help:

1. Clean the area around the clutch with a degreaser and then warm up the surface before attempting to remove it.

2. Pry off the old adhesive with a flathead screwdriver then use a new adhesive to secure the new fan clutch in place.

3. Insert a T-bar tool into one of the slots on the fan clutch and use your other hand to twist it clockwise while pulling upwards. The fan clutch should come free after a few twists.


If you’re looking to remove the fan clutch on your car then you’ll need to follow these simple steps: 1. Turn off the engine and disconnect the battery cable. 2. Remove the glove box and center console – there are three Phillips screws at each end of these pieces that need to be removed. 3. Disconnect the power steering pump wire from the motor casing and unscrew it, then remove the cover plate located behind it. The fan clutch is attached to thisplate by two bolts, and can now be lifted out of its housing cavity.