Home » Guides » How To Remove Rocker Panel Molding

How To Remove Rocker Panel Molding

Rocker panel molding is one of the most common types of trim that you may find on a car. It’s basically a thin piece of plastic or metal that’s used to accentuate the line between the front and rear seats. But why does it need to be removed? Well, because it can become damaged over time and start to peel away, revealing the underlying fabric underneath. Not only does this look terrible, but it also poses a safety risk. Fortunately, removing rocker panel molding is not as difficult as it may seem. In this blog post, we will walk you through the process step by step and explain everything you need to know in order to get started.

What is Rocker Panel Molding?

Rocker panel molding is a type of trim that is typically found on the body of a car. It is designed to give the car a more upscale look and can be difficult to remove. Removal typically requires cutting or removal of the plastic surrounding the molding with a saw or other sharp object.

How to Remove Rocker Panel Molding

If you’ve decided that it’s time to remove your old rocker panel molding, there are a few things you need to know before getting started. First and foremost, make sure you have the right tools. Unless you’re very careful, a rotary tool can easily damage your panels if you’re not careful. Second, be patient – the job can take a bit of time, but it’s definitely worth it in the end. Finally, make sure to wear a dust mask and protective clothing when working with any type of resin or varnish – both of which can be very toxic when mixed with air.

First thing you’ll need is some sort of rotary tool – something with a sharp blade on the end. Be sure to use plenty of safety precautions when using this tool, as even small injuries could lead to serious complications.

Next up is some sort of putty knife – something that will help smooth out the edges of the rocker panel as we work. Make sure that the surface you’re working on is completely clean before starting – anything that might get onto the panel will only make things more difficult later on.

Once everything is ready, place one edge of your rocker panel molding against the putty knife and begin shaving off the excess material with quick strokes. Don’t worry about getting too close to any wiring or screws – we’ll deal with those later on.

Once all of the excess material has been

Tips for Removing Rocker Panel Molding

There are a few tips to keep in mind when removing rocker panel molding.

1. Use a prying tool – A prying tool is best for removing the molding from the rocker panels. This will make the job easier and less time-consuming.

2. Work slowly and carefully – Do not rush the process; it will only result in damaged panels and possibly even more damage to the car’s interior. Take your time and work one panel at a time, keeping an eye out for screws or rivets that may be hidden behind the molding.

3. Use a degreaser – Once you’ve removed all of the molding, use a degreaser to clean off any loose screws or debris that may have been left behind. This will help ensure that there are no further problems with your car’s interior while you’re working on it.


If you’re like most car enthusiasts, you’ve probably always wanted to know how to remove rocker panel molding. Well, after reading this article, you’ll finally have the knowledge and tools necessary to get the job done. If you’re comfortable working with a power drill and a screwdriver, removing rocker panel molding is an easy task that can result in a cleaner car interior. Be sure to read through the steps thoroughly before getting started so that you don’t make any mistakes and damage your vehicle. Thanks for taking the time to read our article!