Home » Guides » How To Remove Broken Exhaust Manifold Bolts

How To Remove Broken Exhaust Manifold Bolts

If you own a car, you know that it’s important to have it in good condition. That means keeping the exhaust manifold bolts tight so that your engine doesn’t fall apart. Unfortunately, sometimes these bolts break. In this blog post, we will teach you how to remove broken exhaust manifold bolts safely and without causing any further damage. We’ll also provide tips on how to replace broken bolts in a safe and efficient manner.

Identification of the Broken Exhaust Manifold Bolt

Broken exhaust manifold bolts can be difficult to identify, especially if the bolts are rusted in place. Here are a few tips to help you identify and remove broken exhaust manifold bolts:

1. Inspect the surrounding area for signs of rust or metal shrapnel. If you find any evidence of damage, proceed with step 2.
2. Use a hacksaw to cut off the bolt head using a precision cutting guide such as an angle grinder or sawzall. Be sure to wear safety gear and use a dust mask if possible.
3. If the bolt head is too large or too rusty to cut off easily, use a torch to heat up thebolt until it breaks free.
4. Once the bolt has been removed, use a wrench to twist the nut off of the broken bolt and discard it.

Removal of the Broken Exhaust Manifold Bolt

If you have a broken exhaust manifold bolt, there are a few things you can do to fix the issue. First, remove the broken bolt by hand. If it is difficult to remove, use a wrench. If the broken bolt is stuck, use penetrating oil or brake cleaner to break the seal and free the bolt. Next, take the broken bolt to a mechanic for repair.

Replacement of the Broken Exhaust Manifold Bolt

Broken exhaust manifold bolts are a common problem on older cars. They can cause a lot of noise and generally require special tools to remove. Here’s how to replace them:

1. Locate the broken bolt. On most cars, the bolt is located near the front of the engine bay.

2. Remove the nearby muffler or cat-back exhaust system. This will give you easier access to the manifold bolts.

3. Remove the broken bolt using a wrench or pliers. Be sure to use torque specs that are specified by your carmaker for this type of bolt replacement!