Home » Guides » How To Remove Broken Bolt In Tight Space

How To Remove Broken Bolt In Tight Space

Have you ever tried to remove a broken bolt in a tight space? It’s not easy, is it? That’s because removing a broken bolt in a tight space requires precision and strength—two things that are often in short supply. If you find yourself in this situation, don’t worry; there’s an easier way. Check out our tutorial on how to remove a broken bolt in a tight space without any drama. ###

What You’ll Need

The first step in removing a broken bolt is assessing the space it’s located in. If the bolt is located in a tight space, using a breaker bar may be necessary to remove it. Once the bolt is removed, use a wrench to unscrew it from the object it’s attached to.

How to Remove the Broken Bolt

If you have a broken bolt, there are a few steps you can take to remove it. Some methods require a special tool, while others can be done with common tools.

The most common way to remove a broken bolt is to use a wrench. If the bolt is difficult to access, you can use an extension cable or hydraulic jack to help pull it out.

Another method is to use a crescent wrench. First, locate the head of the bolt and unscrew it using your regular wrench. Next, use the crescent wrench to turn the head of the bolt until it comes loose. Finally, unscrew the whole bolt with your regular wrench.

Tips for Removing a Broken Bolt in Tight Spaces

Small engines, such as lawnmowers and chain saws, rely on small spark plugs to start the engine. When the spark plug fails, the engine will not start.

Step 1: Remove the air filter.

Remove the air filter by removing the two screws that hold it in place. If your mower has a pollen filter, be sure to remove that as well.

Step 2: Locate the broken spark plug wire.

Locate the broken spark plug wire by looking for a plastic or metal connector that is bent or melted. Straighten out the connector if it is bent and secure it with electrical tape if necessary. If there is no broken wire present, skip to step four.

Step 3: Strip away insulation from end of broken wire.

Strip away insulation from both ends of the broken wire using an insulated stripper tool or a solder gun and proper soldering equipment. Make sure you use a heat-resistant glove to protect your hand from hot wires and fluxes. Do not overheat either end of the wire – this can cause a fire.


A broken bolt can be a major inconvenience in any home. Not only is it difficult to remove, but it can also lead to safety hazards if not fixed quickly. If you’re faced with a broken bolt in a tight space, here are five steps you can take to get the job done: 1) Clear the area of anything that could obstruct your view or add weight to the object being removed. This includes furniture and other objects that might fall and cause damage while you’re working. 2) Locate the object causing the obstruction. This might be something as small as a bolt head or as large as an entire doorframe. 3) Remove any obstacles in your way (this includes pieces of metal). 4) Use a wrench or pliers to remove the broken bolt from its mounting location. Make sure to use caution so that you don’t accidentally snag yourself on surrounding wires or screws. 5) Once the bolt has been removed, clean up any debris left behind and replace any damaged parts as necessary.