Have you ever found yourself struggling to remove a stuck oil filter cap? If so, you aren’t alone. In fact, this is one of the most common car problems that mechanics are called to fix. Luckily, there is an easy way to remove a stuck oil filter cap—and it doesn’t involve any special tools or techniques. Follow these simple steps and you should be able to remove your filter cap in no time at all.
Tools You’ll Need
If you’ve ever had to remove an oil filter cap, you know that it can be a frustrating process. There are a few tools that you’ll need to get the job done properly.
One of the most important tools is a Filter wrench. This tool has a serrated wheel on one end and a handle on the other. It’s used to tighten or loosen oil filters.
You’ll also need some pliers, needle-nose pliers, and a wrench for the cap itself. And finally, you’ll need some WD-40, gasoline, and a rag to clean up any messes made during the process.
How to Remove a Stuck Oil Filter Cap
If your car’s oil filter cap is stuck on, it can be a real headache to remove. There are a few different ways to try and remove the cap, but the most common is to use a wrench. First, loosen the bolt that holds the filter in place by turning it counterclockwise with a wrench. Next, use a pair of pliers to grab onto the lip around the edge of the filter and pull it off. If all else fails, you can use a cutting tool to slice through the seal around the top of the filter and unscrew it.
Tips for Success
In order to remove a stuck oil filter cap, start by unscrewing it from the engine. Be careful not to lose any of the oil that is coming out of the filter. If there is still oil coming out after you have unscrewed the cap, then you may need to use a funnel to help drain the excess oil. Once you have removed the cap, pour a small amount of anti-freeze or brake fluid onto the prongs that are sticking out of the filter and wait until it has cooled before screwing it back on.