Home » Guides » How To Put Transmission Fluid In

How To Put Transmission Fluid In

Drivetrain maintenance is important for keeping your car running smoothly and avoiding costly repairs. One of the most common problems with transmissions is transmission fluid leakage. Transmission fluid is a slippery, viscous liquid that helps shift gears and transmit power from the engine to the wheels. If transmission fluid leaks, it can cause severe damage to the transmission, making it difficult to shift gears or even remove the car from the road. In this blog post, we’ll show you how to put transmission fluid in and help keep your car running smoothly.

What is Transmission Fluid?

Transmission fluid is a type of automotive lubricant that helps keep your car moving by transmitting engine power to the wheels. It also regulates the temperature of the transmission and helps protect it from corrosion. In addition, transmission fluid is essential for maintaining optimal shifting and driveability.

How to Use Transmission Fluid

If your transmission has been leaking, it’s time to put in a new transmission fluid. Transmission fluid is a medium that helps your engine move by providing resistance to the movement of the pistons and rotors inside the transmission. The three most common types of transmission fluids are Red Line, MTBE, and GL-8.

There are several ways to put transmission fluid in your car. One way is to use a funnel. Fill the funnel with transmission fluid and place it over the dipstick tube on the side of the car. Twist the top of the funnel until it locks into place and pour the contents down the dipstick tube. Be sure to clean any spills away before driving your car.

Another way to put in new transmission fluid is to use a filler cap kit. These kits come with two caps – one that goes over the dipstick tube and one that goes on top of the oil filter housing. Pour new transmission fluid into both caps until they’re full, replace both caps, and turn them clockwise until they lock into place. Make sure you clean any spills away before driving your car.

If you don’t have a kit or don’t want to get dirty, you can also use a syringe to fill up your Transmission Fluid Reservoir (TFR). To do this, remove the cap from TFR and unscrew it slightly so that it’s open at one end (the “fill” end). Turn TFR so that its “

When to Change Transmission Fluid

When it’s time to change the transmission fluid in your car, there are a few things to keep in mind. First, make sure you have the correct tools – a funnel, bottle, and gloves – so you can avoid spilling the fluid. Second, be aware of when to service your car. Check your owner’s manual for specific information on when to change your transmission fluid. Third, always use the correct type of transmission fluid. A synthetic blend is not recommended for use in automatic transmissions, for example.

Tips for Avoiding Transmission Drip

If you have a transmission leak, it’s important to take action before the fluid drips onto the ground. Here are some tips for avoiding transmission drip:

1. Check your fluid level often – Add or remove fluid as necessary to maintain a proper level in your transmission.
2. Wear gloves and a mask when changing the fluid – Transmission fluids can contain harmful chemicals that can irritate skin and lungs.
3. Use a container with a tight-fitting lid – Fluid will seep out of leaks even if the container is not airtight. Use a container with a tight-fitting lid to avoid spilling the fluid.
4. Immediately fill any large holes in your transmission – Holes larger than 1/2 inch in diameter should be filled with a sealant such as CCL-2 or GHT-1 before adding new fluid.


Putting transmission fluid in your car is an important task that can save you a lot of money in the long run. Not only will it keep your car running smoothly, it will also protect its engine from damage. Follow these steps to put transmission fluid in your car: 1) Park your car on a level surface so that the reservoir is at the lowest point possible. If you’re using a conventional (non-hydraulic) transmission, raise the vehicle and use a funnel to fill the reservoir from the oil pan. If you have a hydraulic transmission, park on an incline so that the reservoir is at the highest point possible and then fill it from under the hood. 2) Close all of the doors and windows, turn off all exterior lights, and disable any security systems. This will help prevent contamination by thieves or other unauthorized persons who might be trying to steal your fluid while you’re working inside your car. 3) Open either end of one of your filler caps (if using a conventional transmission) or unscrew both caps if using a hydraulic system). NOTE: Do not overfill! Adding too much fluid can cause leaks and damage to your transmission. Use just enough fluid to reach halfway up each filler