Home » Guides » How To Put Automatic Car In Neutral With Dead Battery’

How To Put Automatic Car In Neutral With Dead Battery’

Sometimes the simplest things are the most difficult to do. That’s especially true when it comes to car maintenance and repairs—especially if you don’t have any experience working on cars. In this blog post, we will show you how to put your car in neutral without a battery and help you troubleshoot common car problems. From blower motor issues to dead batteries, we’ll teach you everything you need to know in order to get your car back on the road.

What You’ll Need

What You’ll Need:
-An automatic car
-A cable or a jump start
-A battery that is at least 12 volts
-A voltmeter
– jumper cables
1. Open the door of the car, and if it’s an automatic, make sure the parking brake is off. 2. Connect one end of the cable to the positive battery terminal, and connect the other end of the cable to the negative battery terminal. 3. Start your engine and let it idle for about 30 seconds. This will charge up your battery enough so you can start your car. 4. Insert the cables into both cars and attach them to their corresponding terminals on each battery. 5. Turn on your voltmeter and check to see if the voltage between both batteries is 12 volts. If not, go back step four and try again. 6. If everything looks good, start your car with the keyless entry code, wait for it to start, then press down firmly on the gas pedal and hold it until you hear a clicking noise from under your car that means it’s in neutral (the emergency brake should now be off). 7. Release the gas pedal gradually and drive away carefully; remember to turn on your headlights as you leave!

How to Do It

If you’re stranded on the side of the road with a dead battery, don’t panic. There is a way to get your car into neutral, even if it’s not running. First, make sure your car is in park. Second, use your emergency key to turn the ignition to the “off” position. Next, use your floorboard to push down on the gas pedal and engage the parking brake. Finally, use your emergency key to turn the ignition back on and release the parking brake. Your car should now be in neutral and ready to be towed.

Warning: Don’t Do This At Home

If you find yourself in this situation, DON’T TRY to fix the problem yourself! There are many things that can go wrong, and if you don’t have the right tools or know-how, you could end up with a worse scenario.

In this scenario, we’ll describe how to safely get your car out of park or neutral while the battery is dead. Parked cars present a dangerous hazard; not only are they a potential obstacle in case of an emergency evacuation, but they also increase the odds of crashing into other vehicles.

To start, make sure that your car is fully stopped and all doors are closed. Next, locate the “neutral” gear by turning the knob on the transmission to the opposite direction of “park.” This will shift all gears to neutral. Once you’ve found neutral, release the parking brake so that your car can move. Be careful not to move your car too quickly; if it’s moving too quickly, it could jump out of neutral and cause an accident.


If your car is in neutral, but the battery is dead, you’ll need to use a tow truck to get your car moving. Here’s how: 1) Park behind the vehicle with the engine off. 2) Have someone inside the car open the hood and disconnect all of the cables that are related to the steering, brakes, and throttle. 3) Have someone outside connect a cable to one of the front wheels and have someone else outside start turning it by hand. 4) The vehicle will now move backwards while people inside keep turning the wheel!