Home » Guides » How To Install Roof Rack Cross Bars

How To Install Roof Rack Cross Bars

If you’re in the market for a new car, you may be considering adding a roof rack. If you’re not familiar, a roof rack is a great way to transport heavy items without having to worry about them damaging your vehicle. Adding a roof rack can be a hassle, though. Not only do you have to install it yourself, but you also need to make sure that the bars fit properly and don’t damage your car or impede its aerodynamics. In this article, we will walk you through the process of installing roof rack cross bars, from planning to execution. By following our tips, you’ll be able to install your rack without any trouble at all.

What are Roof Rack Cross Bars?

The Roof Rack Cross Bars are a great way to transport items without having to remove the roof of your vehicle. The bars come in a variety of sizes and can be installed in minutes with just a few tools.

There are two types of Roof Rack Cross Bars- the Skirt Mounted Cross Bar and the Thule Wingman Cross Bar.

The Skirt Mounted Cross Bar is mounted on the outside of your vehicle’s roof, below the antennae. This type of cross bar is great for transporting lighter items, as it doesn’t put too much stress on your roof or jeep.

The Thule Wingman Cross Bar is mounted on the inside of your vehicle’s roof, above the antennase. This type of cross bar is perfect for transporting heavier items, as it puts less stress on your roof and jeep.

Both types of cross bars come with mounting brackets that fit most Jeeps, Trucks and SUV’s. They also have an adjustable height so that you can find the perfect configuration for your vehicle.

How To Install Roof Rack Cross Bars

If you’re looking to add a bit more stability and storage to your ride, installing roof rack cross bars is a great way to go. There are a variety of different styles and configurations available, so finding the right set for your vehicle is easy. Here’s how to install them:

1. Locate the mounting points on the roof of your vehicle. These will depend on the type of rack you choose, but typically they’ll be near the front or rear of the car.

2. Slide the cross bar over the mounting points and tighten down with screws or bolts as needed. Be sure to check that all hooks and straps are in place before tightening down too much – otherwise you could end up with a dangerous situation!

3. Add any additional storage devices (cargo nets, sleeping bags, etc.) to the bars using compatible straps and brackets. You’re now ready for some serious cargo hauling!

What to Consider When Installing Roof Rack Cross Bars

When installing roof rack cross bars, it is important to consider the weight and distribution of the load. Cross bars should be placed at a height that will ensure the load is balanced over the entire cross bar length. The mounting points for the roof rack should also be considered when selecting a location for cross bars. For optimal loading and unloading, cross bars should be close to either side of the vehicle.

To install roof rack cross bars, first remove any existing hardware or brackets from the vehicle’s roof. Next, measure and cut the necessary pieces of metal to fit between the vehicle’s sheetmetal and roof. Finally, attach the metal pieces using screws or bolts.


Installing roof rack cross bars can be a hassle, but it’s one that is well worth taking on. Not only will you get more storage space for your gear, but you’ll also be able to keep your vehicle looking sleek and clean. If you’re interested in installing roof rack cross bars, read through this guide and follow the steps carefully. You won’t regret it!