Home » Guides » How To Install An Orifice Tube

How To Install An Orifice Tube

When it comes to plumbing, everyone has a job to do. This includes fixing leaks and installing new fixtures. One of the more common fixtures that people install is an Orifice Tube. What is an Orifice Tube? Simply put, it’s a tube that connects a fixture in your plumbing system to the outside world. This is essential for making sure that water, gas, and other fluids are properly delivered to where they need to go. If you’re wondering how to install an Orifice Tube, this guide will walk you through the entire process. From planning to installation, everything you need to know is covered here.

What is an Orifice Tube?

An orifice tube is a pipe that is used to convey water, gas, oil, or other fluid substances. It is often used in industrial applications where it is necessary to move large amounts of fluid quickly and safely. Orifice tubes are also commonly used in home heating and cooling systems to move air or water.

How to Install an Orifice Tube

Installing an orifice tube is a simple task that can increase your home’s water efficiency. An orifice tube is simply a pipe that directs water to specific areas in your home, such as your sinks and toilets.

To install an orifice tube, you will first need to gather the necessary materials. These include an orifice tube, flexible tubing, caulk, sealant, and screws. You will also need a drill and a screwdriver.

Once you have gathered your materials, it is time to start drilling the hole in your wall. Make sure that the hole is slightly larger than the width of the orifice tube so that it will fit snugly inside. Once the hole is drilled, insert the flexible tubing into the hole and twist it around until it forms a snug loop. This loop should be large enough to accommodate both the orifice tube and the screw that will be used to secure it in place later on.

Now comes the tricky part: securing the tubing loop to the wall using screws. Carefully measure and mark where each screw needs to go before beginning screws installation. Be sure not to over-tighten screws as this could cause damage to your tubing loop and/or walls! If everything goes according to plan, you should now have an installed orifice tube!

What are the Benefits of an Orifice Tube?

An Orifice Tube is a water pipe that has been specifically designed to allow water and wastewater to flow through it without becoming mixed. This type of pipe is often used in construction projects because it is durable, affordable, and easy to install. Here are some of the benefits of using an Orifice Tube:

-It is durable: An Orifice Tube is made from sturdy materials that can withstand the weight of water and wastewater flowing through it.
-It is affordable: An Orifice Tube is less expensive than other types of pipes, making it a good option for budgeted projects.
-It is easy to install: An Orifice Tube is simple to put in place, requiring only basic plumbing skills.

How to use an Orifice Tube

An orifice tube is a pipe designed to allow water, gas, oil, or other fluid substances to flow through it without being obstructed. They are used in a variety of industries and can be found in both residential and commercial applications.

An orifice tube must be properly installed in order to function properly. The following steps will help ensure an effective installation:

1. Measure the distance between the orifice and the desired point of use. This will determine the size of the orifice tube required.

2. Cut the desired length of tubing from the orifice tube stock. Make sure the tubing is evenly cut so that it does not kink or twist during installation.

3. Connect one end of the tubing to the desired point of use and connect the other end to a water supply source, gas supply source, oil supply source, or other appropriate equipment. Be sure to check for leaks before continuing!

4. Position and tighten the connections as necessary until everything is snugly connected. Be sure to wear safety goggles, gloves, and heavy duty construction boots during installation in order to protect yourself from potential injury.


If you’re in need of help installing an orifice tube, don’t hesitate to reach out to a plumbing professional. They are experts at this task and can get the job done quickly and efficiently. However, if you have some experience with plumbing and would like to try installing an orifice tube on your own, follow these steps: 1) Make sure all the necessary supplies are at hand before starting: pipes, faucet adapters, sealant, enough water supply for the job (if applicable), and a level surface. 2)Measure the area where the orifice tube will be installed. This is important so that the correct size of adapter pipe is purchased. 3) Compare the size of the adapter pipe to that of the existing pipes in your drainage system. If there is no existing pipingï—for example, if you’re replacing an entire drainage systemï—you’ll need to order a custom-made fitting from a plumber. 4) Connect one end of the adapter pipe to either side of the faucet using supplied fittings. Then tighten both fittings using a wrench set at least two-thirds of a turn beyond what is needed for normal residential use.”