Home » Guides » How To Fix Horn Switch In Steering Wheel

How To Fix Horn Switch In Steering Wheel

A horn switch is a device that controls the horn on your car. When it goes out, it can be quite a hassle to get the car started. In this article, we will show you how to fix a horn switch in a steering wheel. It’s not something you want to suffer through, so let us help you out!

Identification of the problem

The horn switch in a steering wheel can go bad, causing the car to honk when you try to turn the wheel. The switch sends electrical impulses to the horn, letting you know when you need to stop. When the switch goes bad, it doesn’t send these impulses correctly, so the car always honks. There are several ways to fix this problem.

Troubleshooting the problem

If you are experiencing problems with your horn, there are a few things that you can do to try and fix the issue. First, make sure that the horn is plugged in and working. If it is not, you may need to replace the cord. Second, check to see if there is any obstruction in the horn circuit. This could be caused by a metal object blocking the horn wire or a dirty connector. If neither of these solutions work, you may need to take your car into a mechanic for repair.

Fixing the problem

The Horn switch on the steering wheel is a common issue that can be fixed by following these simple steps:

1. Remove the horn switch from the steering wheel by prying it off with a flathead screwdriver.

2. Clean the contact points on both ends of the horn switch with a cotton swab and rubbing alcohol.

3. Apply a small amount of electrical tape to one end of the new horn switch and place it in the same position as the old horn switch. Make sure that the tape is tight against the contact points on both ends of the new horn switch.

4. Replace the old horn switch with the new one and replace the screwdriver