If you’re looking to add an aftermarket mic to your 2017 Dodge Charger, there are a few things you need to know. First, you’ll need to purchase an adapter that will allow you to connect the mic to the factory radio. Once you have the adapter, follow these simple steps and you’ll be up and running in no time.
- Open the glove box and locate the microphone connector
- Unplug the connector from the factory microphone
- Plug in the aftermarket microphone to the connector
- Test the microphone to ensure it is working properly
Credit: www.amazon.com
How Do I Install an External Mic in My Car?
Assuming you would like to install an external microphone in your car:
There are a couple different ways that you can go about installing an external microphone in your car. The first option is to splice the microphone into the wiring of your car stereo.
This option is generally pretty easy to do and only requires a few tools.
The second option is to use a FM transmitter. This option is a little bit more complicated, but it has the added benefit of not permanently altering your car’s wiring.
Here are some general instructions for each method:
Splicing into Your Car Stereo’s Wiring:
1. Start by disconnecting your car battery.
This will prevent you from accidentally shorting out any of the wires while you’re working on them.
2. Locate the wire that connects your car stereo to its power source. In most cases, this wire will be red or yellow.
Once you’ve located it, carefully cut it with a pair of wire cutters or scissors. Make sure to leave enough slack on either side of the cut so that you can easily work with the wires.
3a) If your microphone uses a 3-conductor cable (meaning there are three wires inside), then one of those wires will be dedicated to ground (usually black).
Splice this wire into the ground wire coming from your stereo (also usually black).
3b) If your microphone uses a 2-conductor cable, then simply solder or twist together the two exposed wires coming from your stereo and microphone respectively and cover them with electrical tape or shrink tubing once they’re securely connected..
Installing a FM Transmitter:
1. Start by finding a good location for the FM transmitter unit itself—somewhere where it won’t get in the way, but where its signal won’t be obstructed by anything metal (like under a seat). Keep in mind that you might need access to this unit later on so don’t put it somewhere too difficult to reach!
2a) If your transmitter has an external antenna, then find a place to route it where it won’t get pinched or damaged as well. Generally speaking, running the antenna along trim panels or underneath seats works well..
How Do I Use My Factory Microphone With Aftermarket Radio?
If you’re looking to use your factory microphone with an aftermarket radio, there are a few things you’ll need to do. First, you’ll need to purchase an adapter that will allow you to connect the two. Once you have the adapter, simply follow the instructions that come with it and you should be good to go!
If you’re having trouble finding the right adapter, feel free to reach out to a professional for help.
How Do I Install a Microphone?
Assuming you would like a step-by-step guide on installing a microphone:
1. Determine where you will be mounting the microphone. Will it be on a stand, clipped to your shirt, or held in your hand?
This will affect what type of microphone you need to purchase.
2. Purchase the appropriate type of microphone and mount for your needs.
3. If necessary, connect the XLR cable from the microphone to an audio interface or mixer.
4. Position the microphone close to your mouth without touching it, at a 45 degree angle pointing towards your cheekbone.
5a. For dynamic microphones: speak or sing into the mic at a moderate level, moving closer or further away as needed to find the sweet spot where the mic is most sensitive to your voice without picking up too much unwanted room noise.
You should hear yourself loud and clear in your headphones or monitors without any distortion.
5b. For condenser microphones: press the power button to turn on phantom power, then speak or sing into the mic at a moderate level, moving closer or further away as needed to find the sweet spot where the mic is most sensitive to your voice without picking up too much unwanted room noise You should hear yourself loud and clear in your headphones or monitors without any distortion.
.
How Can I Improve My Car Microphone Quality?
If you’re looking to improve the quality of your car’s microphone, there are a few things you can do. First, make sure the microphone is positioned correctly. The mic should be close to your mouth, but not so close that it picks up your breath noise.
You can also try using a pop filter to reduce plosives (hard “p” and “b” sounds). Finally, if you’re still having trouble with clarity, try using a higher-quality mic or investing in a preamplifier.
What They Don't Want You To Know… DODGE CHARGER HIDDEN FEATURES!
Hands Free Microphone Car
In-car hands free microphone systems are designed to let you make and receive phone calls without having to take your hands off the wheel. There are a variety of different types and brands of these devices, but they all serve the same purpose: to keep you safe while on the road.
If you’re looking for a hands free microphone system for your car, there are a few things you’ll need to consider.
First, think about how you’ll be using it. Are you mostly making calls, or do you also want to be able to listen to music or navigation instructions? This will help narrow down your choices.
Next, take a look at your budget. There are many affordable options available, but if you want something with more features or better sound quality, you may have to spend more.
Finally, check out some reviews before making your purchase.
This way, you can get an idea of which products are most popular and well-rated by other consumers.
With these factors in mind, finding the best hands free microphone system for your car will be much easier. Be sure to shop around and compare prices before making your final decision!
Conclusion
If you’re a fan of music and want the best possible sound quality in your car, then you’ll definitely want to upgrade your factory microphone to an aftermarket one. Not only will this give you better sound quality, but it will also allow you to be heard more clearly by whoever is on the other end of the line. And if you have a newer Dodge Charger, then you’re in luck, because there’s a relatively easy way to do this.
To start, you’ll need to remove the trim piece that’s around the factory microphone. This is held in place by three screws, so simply remove those and set them aside. Next, disconnect the two wires that are connected to the back of the microphone.
Now all that’s left is to connect your aftermarket microphone in its place and reattach the trim piece. That’s it! You should now have much better sound quality when making calls from your car.