Home » Guides » How Much Does It Cost To Replace A Brake Line

How Much Does It Cost To Replace A Brake Line

Brakes are a vital part of every car. Without them, we would all be in serious trouble. But what do you do if your brake line goes bad? A brake line is a tube that runs from the brake pedal to the wheel and it’s responsible for stopping the car. When it goes bad, it can cause a lot of problems. In this blog post, we will explore how much it costs to replace a brake line and give you some tips on how to prevent this from happening in the first place.

What is a brake line?

Brake lines are a crucial component of your car’s braking system. They’re responsible for transferring the energy from the brake pedal to the calipers, and they need to be in good condition in order to work properly. If they’re worn or damaged, your brakes may not work as well as they should. In most cases, it’ll cost around $100 to replace a brake line, but this can vary depending on the make and model of your car.

Types of brake lines

There are a few different types of brake lines, each with its own advantages and disadvantages. The two most common types are steel braided brake lines and rubber hoses.

Steel Braided Lines: Steel braided lines are the most common type of brake line, and they have several advantages. They’re strong and resistant to wear, which means they’ll last longer than other types of brake lines. They’re also flexible, which makes them ideal for use on bikes with suspension components. However, they can be difficult to install and require specialized tools.

Rubber Hoses: Rubber hoses are less common than steel braided lines, but they have some advantages too. They’re lighter than steel braided lines and don’t rust, which means they’re more reliable in wet conditions. They also have a much shorter lifespan than steel braides, so you’ll need to replace them more often.

How to replace a brake line

Replacing brake lines is an easy DIY job that can be completed in just a few hours. Here are the steps:

1. Park your vehicle safely and remove the wheel and tire.
2. Locate the brake fluid reservoir and unscrew the cap.
3. Remove the old line by pulling it out of the caliper. Make sure to wear gloves and a protective mask to avoid contact with brake fluid and metal parts.
4. Install the new line by threading it into the caliper, making sure to tighten it using a wrench or ratchet as needed. Tighten the cap on the brake fluid reservoir before re-installing wheel and tire.

What to watch for when replacing a brake line

If you’re experiencing a lot of brake pedal travel and your brakes are feeling spongy, it may be time to replace your brake line. Brake lines are easy to replace – just make sure to take the following steps:
1. Check for leaks – If there are any signs of leakage, your line is most likely defective and needs to be replaced. Look for wet spots on the ground, pools of fluid under the car, or any sign of fluid seeping from the calipers or drums.
2. Remove the front bumper – If you have a lifted truck or SUV, you’ll need to remove the front bumper in order to get at the brake lines. Make note of where they’re located and disconnect them using a wrench or socket (depending on the type of connector).
3. Disconnect and remove the calipers – The calipers sit on top of the rotors and must be removed in order to access the brake lines. Use a wrench or socket to unscrew them from their mountings.
4. Remove the caliper brackets – The brackets hold the calipers on and should also be removed with a wrench or socket. Again, make note of where they’re located so you can re-install them correctly when replacing the line.
5. Remove the brake line hoses – Separate each hose from its bracket (usually two bolts) and pull outwards until it comes free from its connection point at either end. Be careful not to k

Costs associated with replacing a brake line

There are a few costs associated with replacing a brake line. The most common cost is the labor, which can range from $50 to $200 depending on the severity of the break and the skill of the technician. Other costs include parts and supplies.

The average cost to replace a brake line is around $150, but this price can vary depending on the make and model of your car, as well as where you live.

If you notice that your car is making loud noises when you brakes, or if your brakes seem to not work very well, it’s best to have your brake lines replaced as soon as possible. By doing so, you’ll prevent more serious damage from happening and you’ll save money in the long run.


Brake lines can get expensive to replace, especially if you don’t do it often enough. Here are a couple of tips to help you keep your brake lines in good condition and save money on replacement costs: 1. Check the braking performance of your car regularly using a diagnostic tool like CarMD. This will help you identify any problems with your brakes before they become too costly to fix. 2. Keep an eye out for warning signs that your brake line is about to go bad, such as rubbing or squeaking noises when you apply the brakes. If you notice any of these warning signs, take action quickly and replace your brake line before it becomes too costly to fix.